Ethylene Oxide, 0.25 - 10 ppm (8610580) DVP Solinst 3001 Well Cap Assembly

Solinst 3001 Well Cap Assembly

less than two minutes of gas applied during a calibration

Number of Strokes n: max

Test Points: Use Conductive Material

Acid gases are indicated with different sensitivities

Ethylene Oxide, 0.25 - 10 ppm (8610580) DVP Solinst 3001 Well Cap AssemblyEthylene Oxide, 25 250 ppb, Part # 8610200 Measuring Range: 25 to 250 ppb Typical Measuring Time: 150 to 600 s Accuracy: 25 % (under calibration conditions) Ambient Conditions: Temperature: 10 to 25 C Humidity: 2 to 15 mg L Cross Sensitivity: No influence at 100 ppb ethylene oxide by: 250 ppb acroleine 300 ppb formaldehyde 2500 ppb 2 chloroethanol 3000 ppb ethanol 4500 ppb iso propanol Hose and probe measurement The following flushing time