Simpson MBHU3.56/16KT Galv Masonry Beam Hanger 3-9/16 in x 16 in 10-Ga Steel w/Anchors and Screws Strong-Rod Systems accurate holes sized for common

accurate holes sized for common anchors right from the start - reducing the need for repositioning or corrective drilling and keeping work moving efficiently

making it appropriate for use in regions subject to these structural demands

The CB46 can be installed using either a cast-in-place or wet-set method

Masonry demolition and material removal

Cutting Height (I) 7/8"

Simpson MBHU3.56/16KT Galv Masonry Beam Hanger 3-9/16 in x 16 in 10-Ga Steel w/Anchors and Screws Strong-Rod Systems accurate holes sized for commonSimpson MBHU3. 56 16KT MBHU 3 9 16 in. x 16 in. Galvanized Masonry Beam Hanger with Screws Anchors is a Simpson Strong Tie face mounted connector engineered for attaching beams directly to masonry or concrete walls. As a non welded, one piece design, it supports solid sawn lumber, engineered wood beams, and trusses with confidence. Installation hardware including Titen HD screw anchors and Strong Drive SDS Heavy Duty Connector screws is included in