CMT 852.503.11 Dado & Planer Bit 1-1/4" x 5/8" S=1/2" Wedge Anchors nails and (2) 1/2 in

nails and (2) 1/2 in

Diameter (D) 35mm

The thin kerf plate (

Biscuit Slot Cutting

This means you do not need a different or oversized drill bit - just match the bit size to the anchor size for correct hole preparation

CMT 852.503.11 Dado & Planer Bit 1-1/4" x 5/8" S=1/2" Wedge Anchors nails and (2) 1/2 inThe CMT 852. 503. 11 is a Dado and Planer Bit. Dado and planer bits create wide, flat bottom dadoes and can also be used for light surface planing. Available with and without bearing. SPECIFICATIONS Diameter (D) 1 1 4" Cutting Height (I) 5 8" Total Length (L) 2 3 4" Shank (S) 1 2" Number of Teeth 2 Product Type Dado and Planer Bit Shank 1 2" Blade Material Carbide Tipped (TCT) Rotation Right hand (RH) Country of Origin Made in Italy COMPATIBLE