PHR - Powerhouse Racing Breather Tank for IS300 (Tank Only) Finish:Matte Black Barbed Fitting: A black zinc-plated

Barbed Fitting: A black zinc-plated 3/16" (5mm) barb machined from high strength steel that is compatible with the following vacuum hoses: 5/32" (4mm)

STAINLESS STEEL TURBINE HOUSINGS RATED UP TO 1050° C

Brian Crower Inconel Exhaust Valves +1mm / 30mm for Toyota 2JZ-GTE / GE

FPD-XR base pressure requirement = 40 - 105psi (static)

ARP Head Studs are a very inexpensive part that couldn't be more important to your engine build

PHR - Powerhouse Racing Breather Tank for IS300 (Tank Only) Finish:Matte Black Barbed Fitting: A black zinc-platedPHR Powerhouse Racing Breather Tank for IS300 (Tank Only) SKU: PHR 03091004 Anyone building a high horsepower high boost 2JZ engine has to consider the effects of crankcase pressure at these levels. With the standard PCV valve (only 7mm) the engine simply is not able to remove pressure fast enough from the crank case while under boost. The PHR Race Engine Breather solves this problem by vastly increasing the venting. By removing crank case pressure,